I’m not dead. Honest! It has, however, been a long time between posts. Unfortunately I haven’t been working on project work as much as I would have liked, and I spent a long time waiting for parts to arrive for projects. CreatiVision Controllers (AKA the Dick Smith Wizzard) The new PCBs arrived. It took meContinue reading “A Whole Lotta Nothing”
Tag Archives: Creativision
The Big Haul
So on the weekend, as part of a local organisation, I did some volunteer work. In return I got some old systems donated to me. And what a donation it was! While none of this equipment is in what I would call a “working state”, it’s all fixable and it’s all super interesting. First upContinue reading “The Big Haul”
Update on all the PCBs
So remember all those PCBs I ordered? Let’s break down what worked and what didn’t. What Worked So first up, both my ROM adapters worked without a problem. So we now have a Low Profile Amiga ROM switcher and a Low Profile Microbee ROM switcher. Both built around using turned pins to keep the profileContinue reading “Update on all the PCBs”
Not a Soldering Iron in Sight
Updates Starting with an update on existing projects, I have the Amiga MIDI project working. I’d accidently crossed the input and output lines on the MAX2323 chip. A quick bodle later and it was working. It’s now corrected in the master PCB. I also have permission from Grzegorz Kraszewski to release my version. That wasContinue reading “Not a Soldering Iron in Sight”
Another Productive Break
So, having a week off, I decided to move on a few projects. While not completely successful, I did make some good breakthroughs. Leading up to the break, I started a repair on a huge old CRT TV, It’s not working… yet but I think I just need to check some things on the insideContinue reading “Another Productive Break”
Not much going on…
Mostly I have been working on building a Retro Chip Tester so I can start diagnosing things faster with the Amigas. This is actually for the Artifactory, but I plan to use it for a bit before I drop it off to them. If nothing else, I want to get through the backlog of 4116Continue reading “Not much going on…”
The Archimedes is back on the bench
Now I have an oscilloscope, I thought it was time to break out the Archimedes. So far it has resisted my attempts to diagnose exactly what is wrong with it but I will persevere. Symptoms are the same whether I use a Gotek or a real drive.When you try and access the drive you getContinue reading “The Archimedes is back on the bench”
Posting will slow for a while
So I’ve gone back to work after an extended holiday, so output is likely to slow for a bit. However, I’m still doing retro “stuff” so I thought I’d share some of it. One of the coolest projects I completed on the weekend was building an MT32Pi Hat. This consists of a Raspberry Pi runningContinue reading “Posting will slow for a while”
Bits and Bobs
Well, here we are again. Amiga 2000 I built up the -5v rail for the A2000 and fully reassembled it. Unfortunately the A2000 is presenting with a black screen. No synch or other signs of life. Not the end of the world, but it does mean it’s on hold until my new Oscilloscope arrives. MacContinue reading “Bits and Bobs”
The Collection (As of 27/04/2021)
A quick document of what equipment I have, and what status it’s in, as of today. Monitors 2 x SVideo capable flatscreen monitos. Both support Composite, VGA, Component and SVideo. I use these for a lot of my older 8 Bit systems. They’re generic off brand. ACER-V226HQL. These are capable of syncing right down toContinue reading “The Collection (As of 27/04/2021)”
I Like 8 Bits 